固浪強力型回填寶

Solid wave strong backfill treasure

產品概述Product Overview：

本產品是一種新型輕質無機材料，輕質保溫，使用本產品進行衛生間回填既能減輕建筑物重量，又能規避其他傳統回填材料的缺點。此材料直接燒筑，施工簡單，成本低廉，能從根本上解決衛浴間滲漏與異味的問題，適用于衛浴間回填。

This product is a new type of light inorganic material, light insulation, using this product can not only reduce the weight of the building, but also avoid the disadvantages of other traditional backfill materials. This material directly burning construction, simple construction, low cost, can fundamentally solve the bathroom leakage and odor problems, suitable for bathroom backfill.

產品特點Product characteristics：

1.流動性:未成型之前具有超強流動性，有效包裹給水和排水管道，延長使用壽命。還能解決衛浴間沉箱防水層施工無法到位的各個死角。

2.輕質性:成品干密度只有水的三分之一左右。

3.阻水性:吸水率較低，表面可以形成荷葉現象。而且一立方上千億個獨立的封閉氣泡，使其具有優異的阻水性能，可以一直漂浮在水面上不下沉。

4.環保性:所需原料為水泥、水基泥填充料，本產品為中性，不含苯、甲醛等有害物質，避免了環境污染。

5.施工簡單:1-2小時內可全部完工，可以節省大量工時，節約用工成本，申后易維修。

6.整體性︰現場整體澆筑施工，與主體工程緊密結合形成一個整體，中間沒有空隙，使其具有優異的阻水性能。

7:耐久性:與我們的建筑一樣;主要成份為水泥可以與主體王程同壽

8.抗壓性:現場整體澆注，里外如一，不收縮，不下沉，抗壓強度達到0.8mp

1. Liquidity: before the formation of a super-strong liquidity, the effective wrapping of water supply and drainage pipes, extend service life. Can also solve bathroom caisson waterproof layer construction can not be in place of each corner.

2. Lightness: the dry density of the finished product is only about one third of that of water.

3. Water Resistance: water absorption rate is low, the surface can form lotus leaf phenomenon. And a cubic of zero separate closed bubbles, so that it has excellent water resistance, can always float on the water surface does not sink.

4. Environmental Protection: the raw materials required for cement, water-based mud filler, this product is neutral, free of benzene, formaldehyde and other harmful substances, to avoid environmental pollution.

5. Construction simple: 1-2 hours can be completed, can save a lot of time, save labor costs, easy maintenance after the application.

6. Integrity The integral casting construction in the field is closely combined with the main project to form a whole, and there is no space in the middle, which makes it have excellent water resistance performance.

7: Durability: the same as our buildings; the main component of cement can be the same age as the main Wang Cheng

8. Compressive Strength: cast on site as a whole, no shrinkage, no subsidence, compressive strength of 0.8 MP

施工工藝Construction Technology：

1、做好初步防水、量好回填高度，最好用攪拌器攪拌，做好準備工作。

2、使用方法:使用固浪回填專用設備，加入40~50kg的水再加入固浪強力型回填寶，調制900~920之間，進行發泡，發泡至簡口6~8cm時，加入50kg的水混繼續攪拌4~5分鐘調節轉速至800~820之間直至攪拌均勻。

3、關閉電源,攪拌完成，打開閥門放料至沉箱內。回填至指定高度、回填完成，清理現場，檢測回填空間、攪拌增流。自流平、自然干后進行下一道工序。

1, do a good initial waterproof, backfill height, preferably with a mixer mixing, ready to work.

2. Using method: using the special equipment of solid wave backfill, add 40 ~ 50kg water and then add solid wave strong backfill treasure, mix between 900 ~ 920, carry on foaming, when foaming to 6 ~ 8cm, add 50kg of water and continue to stir for 4 ~ 5 minutes to adjust the speed to 800 ~ 820 until mixing well.

3, turn off the power, mixing is completed, open the valve to discharge into the caisson. Backfill to the specified height, backfill completed, clean up the scene, test backfill space, agitation flow. Self-leveling, natural dry after the next process.

使用范圍Scope of use：

1.主要用于衛廚間回填，也有其他方面的應用。

2.陽臺抬高，空中花園，廁所回填，屋頂隔熱層。

1. The utility model is mainly used for backfilling in the bathroom and kitchen, and also has other applications.

2. Balcony elevation, sky garden, toilet backfill, roof insulation.

參考用量Reference dosage： 

干密度300-350公斤每立方、一次成型。視面積大小將回填產品填滿所需回填區域即可。

Dry density 300-350 kg per cubic, one molding. Depending on the size of the backfill product to fill the required backfill area can be.

注意事項Points to note：

1.在陰涼干燥處存儲，施工環境溫度應在5℃以上。

保質期Expiration date：

原裝密封產品在干燥陰涼的環境下存放。在正常的儲存和運輸條件下，產品的保質期為一年。

 

 

The original sealed product is stored in a dry and cool environment. Under normal conditions of storage and transportation, the shelf life of the product is one years.

 

全國免費服務熱線：400-843-6198      www.xzlqcc.com

?

---