国产91福利在线精品剧情尤物,亚洲午夜无码精选,本地av电影在线观看

固浪防水

固浪 400-843-6198

1919860518@qq.com

QQ:1919860518

廣州市白云區鐘落潭鎮金盆工業區

教您正確使用瓷磚膠的方法、固浪瓷磚膠

2024年01月26日

教您正確使用瓷磚膠-固浪強力瓷磚膠

隨著社會的發展,瓷磚膠代替了水泥砂漿,但很多人不知道怎么使用瓷磚膠,現在我們就來說說如何使用瓷磚膠，首選固浪瓷磚膠。
With the development of society, tile adhesive has replaced cement mortar, but many people do not know how to use tile adhesive. Now let's talk about how to use tile adhesive, the preferred cement tile adhesive.

1. 所有基面應堅實,干燥,清潔,不晃動,無油污,蠟漬,混凝土養護和其他松散物.

2. 清楚混泥土表面的殘余物,特別是傾斜的混泥土平板上所殘留的脫摸擠.

3. 干燥的環境下,施工前必須先潤濕基面.

4. 施工現場只需按要求加水,使用電動攪拌機將水和瓷磚膠攪拌成均勻的膏狀,放置5-10分鐘,再次攪拌均勻即可. 攪拌好瓷磚膠應注意防曬避風.

5. 如果瓷磚和石材勾縫較深或轉較大,較重,則應該采取工作面和瓷磚背面同時涂布瓷磚膠泥的方法進行施工.

1. All base surfaces should be firm, dry, clean, not slosh, free of oil, wax, concrete and other loose materials.

2. Clear the residue on the surface of the concrete, especially the squeezing of the sloping concrete slab.

3. In a dry environment, the base surface must be wetted before application.

4. At the construction site, just add water as required. Use an electric mixer to stir the water and tile glue into a uniform paste. Leave it for 5-10 minutes and mix it again. Stir the tile adhesive carefully.

5. If the joint between the tile and the stone is deeper or larger, and heavier, the construction surface and the back of the tile should be coated with the tile cement at the same time.

注意事項：

施工溫度最好為5-40度,在雨天施工時,一定要做好遮蔽防護措施,并且要確保在貼磚后的24小時內,施工區域不被雨水淋濕。
The construction temperature is preferably 5-40 degrees. When constructing in rainy days, it is necessary to make shielding protection measures, and ensure that the construction area is not wet by rain within 24 hours after tiling.

全國免費服務熱線：400-843-6198

www.xzlqcc.com

常見問題解答

固浪防水

教您正確使用瓷磚膠的方法、固浪瓷磚膠

教您正確使用瓷磚膠的方法、固浪瓷磚膠