固浪超強瓷磚背涂膠

  適用于?；u及其它墻地面磚貼磚時的背面前處理，能有效提高瓷磚與粘結材料之間的粘結強度，解決貼磚會常見的空鼓、脫落問題，對低吸水率、質地致密、表面光滑的石材也有同樣效果 。拋光磚、通體磚、釉面磚、 ?；u、防滑磚、古建磚、馬賽克、大理石、花崗巖、石灰?guī)r、板巖等高密度磚石背面的涂刷。

Applicable to the back pretreatment of vitrified bricks and other wall and floor tiles, which can effectively improve the bond strength between the tiles and the bonding materials, solve the common hollowing and falling off problems of the tiles, and have low water absorption rate. Stones with a dense texture and a smooth surface have the same effect. Brushing the back of high-density masonry such as polished tiles, whole bricks, glazed tiles, vitrified tiles, non-slip tiles, ancient bricks, mosaics, marble, granite, limestone, slate.

產品特點：

1：增強基材粘結力     2：施工簡便、綠色環保產品

3：降低空鼓率           4：防水、防霉防老化、耐高低溫

Features:

1: Enhance the adhesion of the substrate   2: Simple construction, green products

3: Reduce the empty drum rate                 4: Waterproof, mildewproof, anti-aging, high and low temperature resistant

施工工藝：

1、清理瓷磚背面浮灰、保持干凈，無灰塵、油污、無疏松物等。
2、將本產品直接用滾筒均勻涂刷在瓷磚的背面即可。
3、涂刷后的瓷磚放置一旁，待膠液變成透明狀后（防止粘貼時漿料被擠出），再使用
      瓷磚膠或粘貼砂漿鋪貼瓷磚，能夠有效提高瓷磚的粘貼能力，降低其空鼓率。

Construction process:

1. Clean the back of the tile and keep it clean, free of dust, oil, and loose matter.
2. Apply the product directly to the back of the tile with a roller.
3. Place the tile after painting to make the glue liquid become transparent (to prevent the slurry from being squeezed when pasting), and then use Tile glue or paste mortar tile can effectively improve the paste ability of the tile and reduce its empty drum rate.

注意事項：

1.施工溫度應在5C-35C；

2.涂刷后的瓷磚應在終凝前粘貼完；

3.本產品無需加水，開桶攪拌均勻后直接使用，避免雨天作業

4.為確保瓷磚與基材之間同步熱脹冷縮，要求留縫粘貼。粘貼外墻瓷磚的磚縫不得小于1.5MM

5.因施工操作失誤或沒有按照產品說明規范施工等引起質量事故本公司不負任何責任。

Precautions:

1. The construction temperature should be 5C-35C;

2. The painted tiles should be pasted before final setting;

3. This product does not need to add water, open the barrel and mix it evenly, and use it directly to avoid rainy days.

4. In order to ensure the thermal expansion and contraction between the tile and the substrate, it is required to stick the seam. The brick joint of the exterior wall tile shall not be less than 1.5MM

5. The company is not responsible for any quality accidents caused by construction operation errors or failure to follow the product specifications.

保質期：

原裝密封產品在干燥陰涼的環境下存放。在正常的儲存和運輸條件下，產品的保質期為一年。

Shelf life:

The original sealed product is stored in a dry and cool environment. Under normal conditions of storage and transportation, the shelf life of the product is one years.

全國免費服務熱線：400-843-6198

www.xzlqcc.com